What weight is Hy Gard oil?



Hy-Gard oil can be used in most applications calling for 10W-30 or 5W-30 engine oil for transmission and hydraulic oils.

What viscosity is John Deere Hygard oil?

between ISO 46 and 68 grades

Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index. Hy-Gard viscosity places it between ISO 46 and 68 grades.

What viscosity is Hy Tran oil?





– Hy-Gard oil has a viscosity between the ISO grades of 46 and 68 @ 40°C. – Exceeds JDM J2OC specification.

What SAE weight is hydraulic oil?

Hydraulic 10WT | SAE Grade 10W Viscosity Hydraulic Oil/Fluid



Approved for industrial applications requiring an ISO VG 32 / 10W Oil.

What weight is J20C hydraulic fluid?

G.P.S. This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.



Technical Details.

Manufacturer ‎StarFire
Brand ‎Star Fire Premium Lubricants
Item Weight ‎38.2 pounds
Product Dimensions ‎15.2 x 10.6 x 9.5 inches
Item model number ‎SF Premium J20C Tractor Hyd Fluid

Can I use 20w50 in a hydrostatic transmission?

For use in hydrostatic transmissions in zero turn, stand on and riding mowers requiring a high viscosity transmission fluid, either 20W-50 or 15W-50.

What weight is John Deere hydraulic fluid?





John Deere Classic



Low Viscosity Hy-Gard Hydraulic and Transmission Oil, 32 oz. An exclusive formulation, specifically designed to protect John Deere transmissions, final drives and hydraulic systems.

What is Hy-Tran Ultra?

Hy-Tran Ultra – Gallon. Finest hydraulic/ transmission fluid made. Enhances brake and clutch capabilities while helping reduce brake chatter, clutch slippage and wear, and final drive wear. Provides better water tolerance and filtration efficiency than typical tractor fluids.

What hydraulic oil does case use?

​As technology continues to advance, Case IH stays ahead of the curve with newly improved Hy-Tran Premium Hydraulic Transmission Oil designed to keep tractor transmissions, axles and hydraulic systems free of deposits while inhibiting wear, corrosion, sludge and foaming.

Which hydraulic oil is thicker 32 or 46?

32 is thinner, No. 46 is medium and No. 68 is thicker. Generally speaking, if the temperature is low in winter, use #32 & #46 hydraulic oil with a lower viscosity, and use #68 hydraulic oil with a higher viscosity in summer.

Can I use SAE 30 for hydraulic oil?

SAE 30 Non-Detergent Lubricating Oil is recommended for use in air compressors and hydraulic systems where the use of non-detergent oils is specified. Non-detergent oils are also effective for the lubrication of bearings and chains in non-critical once-through systems and as a general purpose shop lubricant.



What are the different weights of hydraulic oil?

Hydraulic Oil Weight Per Gallon Chart

  • gal. 6.7-7.5 lbs.
  • gal. 13.4-15.0 lbs.
  • gal. 20.0-22.5 lbs.
  • gal. 26.7-30.0 lbs.
  • gal. 33.4-37.6 lbs.
  • gal. 40.1-45.1 lbs.
  • gal. 46.8-52.6 lbs.
  • gal. 53.4-60.1 lbs.

What is the best oil for hydrostatic transmission?

The fluid recommended for Hydro-Gear transmissions and pumps is a 20W-50 motor oil or 15W-50 synthetic motor oil. If the machine has oil reservoirs, they are mounted to the frame behind the seat, for easy access and oil level check accessibility.

What is John Deere Hy-Gard equivalent?

Low-Viscosity Hy-Gard replaces the John Deere All-Weather Hydrostatic Fluid and should be used as a direct replacement for all applications recommending hydrostatic fluid. · Low-Viscosity Hy-Gard is compatible with hydrostatic fluid and can be added to systems, which contain hydrostatic fluid.

What can I use in place of hydrostatic fluid?

Many mower manufacturers will allow the use of 20W-50 motor oil in their transmissions. While motor oil will work in many hydrostatic transmissions, there is a better option. There’s no question that motor oil will capably work in mower hydrostatic transmissions.

What is equivalent to JDM J20C?

The J20D specification is the cold-temperature equivalent to J20C.



Is ISO 68 and AW 68 the same?

AW 68 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 68. This is the thickness of the fluid tested at 40 degrees Celsius. ISO VG 68 is on the heavier side for a hydraulic fluid which flows equivalent to a SAE 20 weight lubricant.

What is the difference between J20A and J20C?

Petro-Canada Lubricants notes that the key difference between JDM J20A (which is replaced by the current JDM J20C or JDM 20D specification) is the addition of the Alli- son C-4 seal, oxidation, wear and frictional characteristics test requirements — a fact that is not commonly known.

What kind of oil goes in a John Deere backhoe?

CASTROL VECTON LONG DRAIN 15W-40 CK-4/E9 best.

What is John Deere Hy Gard equivalent?

Low-Viscosity Hy-Gard replaces the John Deere All-Weather Hydrostatic Fluid and should be used as a direct replacement for all applications recommending hydrostatic fluid. · Low-Viscosity Hy-Gard is compatible with hydrostatic fluid and can be added to systems, which contain hydrostatic fluid.

What is the weight of a John Deere 310 backhoe?

Max Standard Dipperstick Digging Depth: 4.30 m (14 ft. 1 in.) Operating Weight: 6,654 kg (14,669 lb.)