The setup and installation of SmartFeeder takes just a few minutes.
- Download Petnet App. …
- Create your Petnet account, register your pet and food. …
- Power on the bowl. …
- Connect bowl with you phone. …
- Connect SmartFeeder to Wi-Fi. …
- Set up your SmartFeeder. …
- Add food to hopper. …
- Congratulations!
How do I connect my smart pet feeder?
Preparation for connection: – Plug device into a power outlet. Turn on the power switch (at the bottom of feeder). Wait 10 seconds to intialize Smart Pet Feeder 2.0 – Press and hold the SET button for 5-7 seconds until you hear “ding-dong’ sound or the green light will start flashing slowly.
How do you set up an automatic pet feeder?
Quote from video: Once it's on hit the set button three times again to set the time hit the plus button to enter the meal settings hit the set button three more times and the plus or minus to change the value of meals.
How do I connect my Petnet to Wi-Fi?
To configure your SmartFeeder, you’ll need to download the Petnet App. Available on the Apple App Store and Google Play. After, scanning the QR code use the Petnet app to choose your Wi-Fi network and enter your Wi-Fi password. Ensure Bluetooth is enabled on your phone and press connect.
Why is my smart pet feeder offline?
Not connected to WiFi
Move the feeder away from the object or closer to the router. Open the app home screen and press the settings button. Select Wi-Fi Network. Press Reset WiFi.
How does a smart pet feeder work?
The feeder is powered by a USB-A cable and has the option of battery backup using D batteries. You can also create feeding schedules in the app and track how much your pet has eaten. The schedules aren’t dependent on an internet connection, so if power and internet go down your pet will still get its kibble.
How do you reprogram a microchip feeder?
Reset the feeder to factory settings, holding down the Add Pet button for 10 seconds (until the light starts alternating red / green and the lid opens and closes). Then add your pets in to the feeder again.
Is an automatic feeder worth it?
Overall, automatic pet feeders often work well and do what they are supposed to do. If your pet is thriving on a dry food diet and you are familiar with their eating habits, automatic feeders can be a great option for busy days or short trips. However, remember that a feeder should never be a replacement for you.
How do I use auto feeder on my printer?
Using the automatic document feeder
- Remove the printer from the box.
- Remove the protective tape and packaging from the printer.
- Remove tray 1 from the printer.
- Load the paper tray.
- Insert tray 1 into the printer.
- Connect the cords and cables.
How does a microchip pet feeder work?
Product Review: Petnet Pet Smartfeeder 2.0
How do I connect my Genio pet feeder?
Pairing the smart device using Mirabella Genio App
If the Wi-Fi status LED did not blink when the pet feeder was turned on, press and hold the manual feeding button until it the Wi-Fi Status light begins to blink. Return to Genio app and follow the in app instruction to complete the network pairing process.
How do I change the Wi-Fi on my Petkit feeder?
WORKAROUND for single-SSID networks: Signup/login to the Petkit app on your phone. Goto Wifi settings on the same phone and FORGET the network. Go back to Petkit app and add the device and connect to ‘other network’. After this is done it should be on the 2.4Ghz band.
How do you set up a Mirabella pet feeder?
Pairing the smart device using Mirabella Genio App
Remove the pet feeder from the box, connect the adaptor to the pet feeder and plug adaptor into your wall socket. 2. Wait for the Wi-Fi Status LED light start blinking slowly along with a start up sound.